Shangqiu Donghe Special Equipments Co., Ltd.
Main products:Carbon black processing machine, Waste tyre/plastic pyrolysis machine, Waste oil distillation machine
Products
Contact Us
  • Contact Person : Ms. Zhang Wendy
  • Company Name : Shangqiu Donghe Special Equipments Co., Ltd.
  • Tel : 0086-370-3090008,3090007
  • Fax : 0086-370-2962377
  • Address : Henan,Shangqiu,No.18, Yuyuan Road, Economic Development Zone
  • Country/Region : China
  • Zip : 476000

JL-2 of 10MT/D scrap oil /tire oil /plastic oil recycling machine with CE/ISO from donghe

JL-2 of 10MT/D scrap oil /tire oil /plastic oil recycling machine with CE/ISO from donghe
Product Detailed
1.high oil yield rate:75-85 % 2.saving fuel :20% 3.full closed processing environment 4.with CE/ISO9001/14001

Brief introduction

High efficiency, energy saving, big handling capacity, convenient installation, environment protection

Get more profits from waste plastic refining

The traditional refinery equipment named earth burner in China now adopts horizontal fixed treater. The technological process is as below: first manually feed the waste engine oil and raw oil extracted from waste plastics and scrap rubber from the top of split treater, then seal up the feed inlet and heat up slowly the bottom of treater with coal of fuel; the volume of a split treater usually is 20 stere, plus15 tons of material, and usually the smelting completes in two weeks. After the smelting is over, stop for 12 hours to make the treater fully cool down, then open the dregs outlet at the bottom of treater to discharge dregs, feed material from the feed inlet of treater to continue another cycle of refining.

 

the processing flow of Waste oil recycling machine

 

Technological Process

Pump the raw oil for further processing into reboiler, catalyst and heat in a decompression state to distillate oil vapour, make the oil vapour pass the condenser, then the part that can be liquefied will be condensed into oil product, and the part that cannot be liquefied will be sent into air heater for burning.

 

the processing 3D DRAWING of Waste oil recycling machine

Applicable Products & Industries of Oil Refining Treater

1. Raw oil extracted from waste plastics and scrap rubber

2. Waste engine oil

3. Waste raw oil

4. Waste washing oil

Analysis of Economic Benefit

1. Technical parameter of equipment

 

Serial No.

Items

1

Equipment type

JL-1 type

2

Raw material

Raw oil

Waste engine oil Waste plastic oil

Waste rubber oil

3

Structural form

Vertical band tower

4

24-hour disposal amount

(no less than)

6 tons raw material

5

Working form

Intermittent operation

6

Operating pressure

Normal/ Negative pressure

7

Oil yield

(No less than)

70%-80%

8

Power

20.0kw

9

Mode of cooling

Water cooling

10

Consumption of cooling water (T/h)

9

11

Heating mode

Hot air

12

Mounting means

Having base

 

 

the runing project :

 

The certificate of oil distillation machine:

JL-2 of 10MT/D scrap oil /tire oil /plastic oil recycling machine with CE/ISO from donghe



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.